Single 31 Band Graphic Equalizer

Features Single 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of ¡À6 or ¡À12dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch ¡À12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Response of 50kHz Dynamic range of greater than 108dBSpecifications Input Connectors 1/4" TRS, female XLR (pin 2 hot) Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced 40k ohm, unbalanced 20k ohm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot) Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 100 ohm, unbalanced 50 ohm Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth 20Hz to 20kHz, +0.5/-1dB Frequency Response 50kHz, +0.5/-3dB Dynamic Range Typically >112dB Signal to Noise Ratio Typically >95dB THD+Noise Interchannel Crosstalk Bypass Switch Bypasses the graphic equalizer section in the signal path Low cut Switch Activates the 50Hz 12dB/octave high-pass filter Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range Operating Voltage 100-240VAC 50/60Hz Power Consumption 15W Power Connector IEC receptacle Unit Weight 4.8 lbs.(2.2 kg) Shipping Weight 6.2 lbs.(2.8kg) Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W